Tag: machiavellianfictionist

Posted on

How Armor Works: Organic

What better way to get the year going than with another How Armor Works article by  @machiavellianfictionist.   The first article is available here and is an excellent resource for anyone who’s ever had a question about mail of any kind.

The full article is below the cut, please be aware that it does contain imagery of combat and injuries.

– wincenworks

@machiavellianfictionist​ submitted:

In this second article of the series I will explain the various types of armor build using organic material, from textiles and leather to wood.

Perhaps the most prominent form of organic armor were padded or quilted garments, usually in the form of a jacket or coat. This padding is achieved by building the garment from several layers of fabric or leather, or by stuffing it with animal hair (usually horse or sheep). This creates a relatively flexible protection which is very cut-resistant, difficult to pierce and capable of absorbing impact. The earliest use of this type of protection can be traced to the Scythians. Ornaments depicting Scythian horsemen in engravings from before the fourth century BCE show padded coats and trousers, but their exact nature is difficult to determine.

The earliest use of padded armor in ancient Europe is even harder to determine. It has been theorized that at least some Roman soldiers may have some type of padding under their mail, called thoracomachus or subarmalis, but there is very little evidence of this. Theoretical reproductions are usually in the shape of a simple vest or tunic that cover the torso, sometimes with strips of padded material hanging over the hips and shoulders. At least these strips alone, called pteruges after a similar feature of Greek hoplite cuirasses, are constantly seen in contemporary depictions. These could have also been separate from any torso protection and made of fabric or leather, either as protection or as an adornment.

The use of padded armor in the early middle ages is a much debated subject, and we have very little to no evidence to support most theories. This general lack of concrete evidence is what gives this period the name of dark ages. However, it is likely than the earliest iterations of the medieval gambeson were created near the end of this period.

The gambeson or aketon is probably the most ubiquitous type of armor in medieval Europe, perhaps even more than the mail hauberk. The classic gambeson takes the form of a long padded coat, open either at the front or the back. Those opened at the front had an overlap on the opening to avoid creating a gap in the protection it provided. It usually had sleeves, but it could be a simple sleeveless garment. If it was meant to be worn by a cavalry soldier, it would have slits on the front and back so it would comfortably drape down the sides of the horse. Some experts believe the first examples may have appeared around the tenth century. These would have probably had a similar pattern as the mail tunics, ending above the knees and with elbow-length sleeves. We do not, however, have any evidence of both padding and mail being worn together at this period, like it was in later times.

Most people know that mail and padding was worn together, usually the former over the latter, but occasionally the other way around. This practice, however, only became common in the twelfth century, and by the thirteenth century it was virtually universal. On the Bayeux tapestry we can see Norman knights wearing mail with no padding underneath, but a popular theory says they may have had some sort of quilted lining attached to the hauberk. I personally believe the practice may have originated around the time of the first crusade, at the very end of the eleventh century. This combination remained as the pinnacle of European armor through the twelfth century and the first half of the thirteenth century. At the latter third of this timespan a protective garment called the padded chausses emerged, as a quilted protection for the thighs. It’s depicted as being worn over the mail, but it’s possible it was also worn underneath. This piece of armor remained in use through the first half of the fourteenth century, though it wasn’t universally worn.

image

By the twelfth century a type of armor that combined mail and padding had become popular in the regions dominated by the Islamic sultanates and caliphates. A padded coat called a jubbah contained a simple mail haubergeon between layers of padding. The more commonly mention kazaghand, known in Europe as jazerant, had two mail hauberks of different length contained within different organic materials, very often using rivets to hold the layers in place. The innermost layer was heavy cotton padded with rabbit skin. Then followed a long coat of mail, and over it another layer of cotton with padding. Over this came a shorter coat of mail and finally a silk covering, often heavily decorated. These coats opened on the front, with a similar overlap to front-opened gambesons.

In Japan there was also a combination of mail and fabric garments. Most mail armor was attached to some sort of fabric backing, most commonly in the shape of jackets called kusari katabira, but also in the shape of hoods, gloves, vests and even socks. The mail was often lacquered black to prevent rusting. These garments could have the mail concealed within layers of fabric to hide their function as armor. This style of fabric-backed protection existed since the thirteenth century, but it became extremely popular from the seventeenth to the nineteenth centuries. Even in the rapidly evolving plate harnesses of the fifteenth and sixteenth centuries this fabric-backed mail was used as protection on the parts not covered by plates, or to connect these pieces in a similar way to the plated mail described in the previous article.

Back in Europe, as armor evolved gambesons became more elaborate. Fourteenth and fifteenth century gambesons were usually slightly shorter and had a tighter fit than previous models, and they were most commonly open at the front, closed with buttons or buckles. The cut of the sleeves was done very deep into the torso, so the wearer could move their arms freely without having to pull on the rest of the garment. They could also have simple decorative features, like dagged ends at the bottom or a dyed outer layer. When plate leg armor came into use, it was often secured to the inside of the gambeson to keep from it resting its entire weight on the legs. A tight padded or leather waistband could also be used for this purpose. Near the end of the fourteenth century the gambeson had become very narrow at the waist, to better accommodate the new style of torso protection, the globular breastplate.

While mail hauberks over long gambesons were no longer in use by the heavily armored soldiers of the fifteenth century, this combination remained in use by lighter troops through the rest of the medieval period, and even the beginning of the Renaissance. Some soldiers like the Irish gallowglass wore gambesons alone or under a mail hauberk well into the latter half of the sixteenth century.

By the middle of the fifteenth century the arming jack or doublet had been fully developed, a padded garment derivate from the gambeson designed to secure the full plate harness onto the soldier’s body. The armor had small holes through which it could be laced or pointed to the jack, and the leg armor was hanged either directly from the bottom of it or from a separate waistband secured above the hips. Very often strips or sleeves of mail called voiders were attached to this garment to cover the gaps in the plate harness, usually on the armpits and the inside of the elbows. By the end of the sixteenth century it was common to use a padded doublet following the fashions of civilian clothing as protection for the practice of fencing.

Leather was also a very common element of armor. The soft flexible leather most people are familiar with was very often used as an element of armor, and in general in the medieval world it was used to make clothes, lacing, straps and the like. However, when we talk about leather being used as the main protective material, we’re exclusively talking about rawhide. Rawhide is the untanned skin of an animal after it’s been stripped of hair and fat, and then stretched and let try. It’s a hard material that retains some flexibility and can even be slightly transparent if thin enough.

By itself rawhide has some level of resistance to cutting and piercing, and when used in layers it can be very effective at absorbing impact. While they’re not armor, it’s worth mentioning that European wooden shields of all sizes from the migration era onwards have frequently been covered with one or more layers of rawhide for these reasons. At least the rim alone would often be covered with strip of rawhide to prevent it from being cut and split. In other parts of the world shields could be made of several layers of rawhide alone, sometimes with a simple wooden structure to give it shape and rigidity, like the tall shields used by many African tribal warriors. In Sudan and Somalia a particular type of small round shield made from rhino hide could allegedly even stop musket balls.

The use of leather to make body armor goes all the way to antiquity. Its earliest iteration was probably in the shape of scale and lamellar armor. The leather would be layered, shaped and secured in the same manner as metal scales or lames, sometimes in combination with these. This form of defense would be used for many centuries, perhaps most famously by the Mongol warriors of the thirteenth century. The actual structure and function of scale and lamellar armor will be further explained in a future article.

Another use of rawhide was to make boiled leather. This term has been used to refer to many types of fantasy armor, most of them impractical and restrictive garments. Real medieval boiled leather is a very mysterious material, but we do have some historical evidence that was been further studied with the use of experimental archeology. The most plausible theory for the manufacture and use of boiled leather is to cover the rawhide in wax, secure it onto a wooden former and them bake it in an oven until it becomes hard and rigid. Reproductions of this type have a similar feel to modern police riot armor.

The most common form of boiled leather armor was most likely schinbalds, curved plates designed to protect the shins. These appeared in the first half of the thirteenth century, and were usually made of steel or iron, but boiled leather could be used as a more economical alternative. Simple vambraces to protect the forearm are also a very plausible form of defense. The use of boiled leather to protect the torso is much more questionable, since so far there is very few evidence for it, at least in Europe.

In Japan there are also several mentions of boiled leather used to make armor, though I’ve had some trouble finding concrete research material. What I’ve been able to gather comes from the fifteenth century onwards. Some armor worn by relatively poor ashigaru (infantry soldiers) may have been made of boiled leather covered with layers of lacquer. Other pieces of the foot soldier’s armor may have been constructed in the same manner, though most ashigaru were generally less armored than the samurai, who would invariably be clad in iron or steel. The broad conical hat called jingasa could have been made of boiled leather, though iron was the preferred material since it allowed the soldier to use it as a cooking implement.

It’s worth keeping in mind that given the choice between wearing a piece of armor made out of metal or leather, metal is almost always preferable. The only advantage leather gives is reduced manufacturing cost, and perhaps more comfort in certain climates.

In the European Renaissance, near the end of the sixteenth century, a type of armor known as a buff coat appeared. This had the shape of a knee-length coat, sleeveless or otherwise, usually with a broad skirt and a raised collar to protect the neck. It was made with a few layers of rawhide repeatedly treated with cod oil to make them waterproof and to prevent them from rotting. This treatment would give them their characteristic pale yellow color. The edges were sewn together very tightly without an overlap, to prevent the stitching from wearing down. Sometimes a coat could in fact be two coats of different sizes sewn one over the other, to provide better protection in some areas and more flexibility in others. The buff coat could be decorated with ornamental cuts and stitching, or have a fabric lining for comfort, but generally maintained a simple and functional appearance.

The buff coat was of little use against firearms of any kind, but could provide vital protection against swords and pikes, the most common melee weapons of the time. Given its versatility and the complexity of its manufacturing process, even a buff coat of unremarkable quality could cost as much as a breastplate, and the finer models could cost many times more. Buff coats were usually worn underneath a breastplate, though less wealthy soldiers could of course choose to wear it by itself.

Leather and fabric was also used to armor horses. Boiled leather was used to make chamfrons (armor for the horse’s head), sometimes with metallic edges or reinforcements, from the time of the Roman Empire up to the high middle ages. Since the thirteenth century some horses were armored in mail, and some sort of padding or lining was certainly used underneath. We have literary mentions of thick felt used to protect horses, particularly in the Middle East and the north of Africa. There’s also a rising theory amongst cavalry enthusiasts that the heavy mantles used to cover horses, which are widely believed to be purely decorative, may have helped catch arrows that would otherwise strike the troops riding behind the covered horse, but up to this day it’s merely a hypothesis.

We should also keep in mind that, while it may not always be the main protective material, fabric and leather were almost always used in the construction of armor. A metallic lamellar cuirass would need lacing to keep it together. Scale armor needs a backing to have an actual shape. The ventails of the hooded mail hauberk would need lining and lacing to be closed over the face of the wearer (though metallic hooks would also serve). The coat of plates and its later derivatives, the early breastplate and the brigandine, would need a sturdy organic facing to give the plates structure. Even the most elaborate sets of full plate harness relied on a combination of leather straps and lacing to assemble and attach to the wearer.

To finish with leather and fabric, I want to mention a very controversial type of armor. It’s often known as hoplite cuirass, associated with the Greek warriors of antiquity, though variations of it were also used by virtually all the cultures surrounding the Mediterranean. Its earliest appearance is in Homer’s Iliad (estimated between the thirteenth and twelfth centuries BCE) and it remained in use well into the Hellenistic period (starting at the death of Alexander the Great in 326 BCE). The shape is very well known, a hexagonal plate covering the chest from collarbone to navel, connected to a similarly shaped back plate by two rectangular plates at the sides, with pteruges hanging down to the hips. The armor is held in place with the help of a yoke-like piece attached to the back plate which folds forward to cover the shoulders and is then laced to the front. The armor is closed at the left side of the warrior with two lacing points. The whole armor is usually decorated, the edges are painted and the front in particular often had very elaborate designs and metal ornaments.

The controversy lies in the materials and construction of the cuirass. People argue it could have been made with layers of leather, linen or a combination of both. Those who advocate for the linen cuirasses often call this armor linothorax. These is very little evidence to back any of these claims, but I personally believe using leather as the primary material would make more sense, mostly because it would be cheaper. Some cuirasses may have had a thin sheet of metal, either bronze or iron, between the layers of the front plate. These cuirasses were often reinforced with bronze scales. Some were completely covered in them, but they were most commonly used to cover the sides or the waist of the warrior, where experimental archeologists believe they were most likely to be attacked. There’s also some discussion on whether the cuirass was made in a single piece or if it was different pieces connected with hinges and wire pins. Of course, there’s always the possibility that different types of these cuirasses with different construction methods existed at some point in time.

To finish this article, I would like to talk about the armor worn by the native people of the Americas. A common misconception of these people is that of peaceful tribal folk with very primitive and minimal ways of combat. The reality is that when the Conquistadors arrived at the American mainland, they found powerful empires with very well-organized militaries. Some of the most powerful North American tribes had joined together to form the Iroquois Confederacy.

These native soldiers generally worn little in ways of body armor. The most likely reason for this is a preference for comfort in inclement weather. This is an easy conclusion, but I also believe there must have been a preference for light troops suitable for a very mobile type of warfare. There’s also the fact that the metals which made it possible for eastern civilizations to develop rigid armor were very scarce at that time, and were mainly used to make weapons and tools. The troops that could be considered heavy generally relegated the protection of their bodies to their shields, while lighter skirmishers often only carried their main weapons.

The most common form of armor in central and South America came in the shape of a simple quilted vest, very similar to a sleeveless gambeson. This could be of varied length, with the shorter ones stopping above the hips and the longest ones being about mid-thigh length. These could be opened at the front or pulled over the head. Some soldiers may wear richly decorated garments over these armored vests, most famously Mesoamerican warriors who covered themselves in full-body garments designed to look like a beast’s fur or a bird’s feathers. Organic materials were also used to make simple helmets in the form of thick caps.

Wood was normally used to make helmets. Aztec warriors carved hardwood into open-faced helmets shaped and painted like animal heads, to match with the previously mentioned decorated outfits. The Tinglit of the Pacific Northwest Coast, despite their extensive use of firearms, were famous for their use of wooden armor. They made wooden helmets, which came in two pieces, often carved and painted to match. The upper piece would protect the top of the head and the lower piece would surround the face and neck. The wearer could see through the gap between these pieces. They also had wooden body armor in the shape of narrow wooden strips arranged vertically and laced together. This protection was wrapped around the torso and protected it from collarbone to crotch. Most examples of these garments come from the late eighteenth and early nineteenth centuries, but it’s possible that it existed before this time.

Image sources, in order:

Additional Material:

Posted on

How Armor Works: Organic

What better way to get the year going than with another How Armor Works article by  @machiavellianfictionist.   The first article is available here and is an excellent resource for anyone who’s ever had a question about mail of any kind.

The full article is below the cut, please be aware that it does contain imagery of combat and injuries.

– wincenworks

@machiavellianfictionist​ submitted:

In this second article of the series I will explain the various types of armor build using organic material, from textiles and leather to wood.

Perhaps the most prominent form of organic armor were padded or quilted garments, usually in the form of a jacket or coat. This padding is achieved by building the garment from several layers of fabric or leather, or by stuffing it with animal hair (usually horse or sheep). This creates a relatively flexible protection which is very cut-resistant, difficult to pierce and capable of absorbing impact. The earliest use of this type of protection can be traced to the Scythians. Ornaments depicting Scythian horsemen in engravings from before the fourth century BCE show padded coats and trousers, but their exact nature is difficult to determine.

The earliest use of padded armor in ancient Europe is even harder to determine. It has been theorized that at least some Roman soldiers may have some type of padding under their mail, called thoracomachus or subarmalis, but there is very little evidence of this. Theoretical reproductions are usually in the shape of a simple vest or tunic that cover the torso, sometimes with strips of padded material hanging over the hips and shoulders. At least these strips alone, called pteruges after a similar feature of Greek hoplite cuirasses, are constantly seen in contemporary depictions. These could have also been separate from any torso protection and made of fabric or leather, either as protection or as an adornment.

The use of padded armor in the early middle ages is a much debated subject, and we have very little to no evidence to support most theories. This general lack of concrete evidence is what gives this period the name of dark ages. However, it is likely than the earliest iterations of the medieval gambeson were created near the end of this period.

The gambeson or aketon is probably the most ubiquitous type of armor in medieval Europe, perhaps even more than the mail hauberk. The classic gambeson takes the form of a long padded coat, open either at the front or the back. Those opened at the front had an overlap on the opening to avoid creating a gap in the protection it provided. It usually had sleeves, but it could be a simple sleeveless garment. If it was meant to be worn by a cavalry soldier, it would have slits on the front and back so it would comfortably drape down the sides of the horse. Some experts believe the first examples may have appeared around the tenth century. These would have probably had a similar pattern as the mail tunics, ending above the knees and with elbow-length sleeves. We do not, however, have any evidence of both padding and mail being worn together at this period, like it was in later times.

Most people know that mail and padding was worn together, usually the former over the latter, but occasionally the other way around. This practice, however, only became common in the twelfth century, and by the thirteenth century it was virtually universal. On the Bayeux tapestry we can see Norman knights wearing mail with no padding underneath, but a popular theory says they may have had some sort of quilted lining attached to the hauberk. I personally believe the practice may have originated around the time of the first crusade, at the very end of the eleventh century. This combination remained as the pinnacle of European armor through the twelfth century and the first half of the thirteenth century. At the latter third of this timespan a protective garment called the padded chausses emerged, as a quilted protection for the thighs. It’s depicted as being worn over the mail, but it’s possible it was also worn underneath. This piece of armor remained in use through the first half of the fourteenth century, though it wasn’t universally worn.

image

By the twelfth century a type of armor that combined mail and padding had become popular in the regions dominated by the Islamic sultanates and caliphates. A padded coat called a jubbah contained a simple mail haubergeon between layers of padding. The more commonly mention kazaghand, known in Europe as jazerant, had two mail hauberks of different length contained within different organic materials, very often using rivets to hold the layers in place. The innermost layer was heavy cotton padded with rabbit skin. Then followed a long coat of mail, and over it another layer of cotton with padding. Over this came a shorter coat of mail and finally a silk covering, often heavily decorated. These coats opened on the front, with a similar overlap to front-opened gambesons.

In Japan there was also a combination of mail and fabric garments. Most mail armor was attached to some sort of fabric backing, most commonly in the shape of jackets called kusari katabira, but also in the shape of hoods, gloves, vests and even socks. The mail was often lacquered black to prevent rusting. These garments could have the mail concealed within layers of fabric to hide their function as armor. This style of fabric-backed protection existed since the thirteenth century, but it became extremely popular from the seventeenth to the nineteenth centuries. Even in the rapidly evolving plate harnesses of the fifteenth and sixteenth centuries this fabric-backed mail was used as protection on the parts not covered by plates, or to connect these pieces in a similar way to the plated mail described in the previous article.

Back in Europe, as armor evolved gambesons became more elaborate. Fourteenth and fifteenth century gambesons were usually slightly shorter and had a tighter fit than previous models, and they were most commonly open at the front, closed with buttons or buckles. The cut of the sleeves was done very deep into the torso, so the wearer could move their arms freely without having to pull on the rest of the garment. They could also have simple decorative features, like dagged ends at the bottom or a dyed outer layer. When plate leg armor came into use, it was often secured to the inside of the gambeson to keep from it resting its entire weight on the legs. A tight padded or leather waistband could also be used for this purpose. Near the end of the fourteenth century the gambeson had become very narrow at the waist, to better accommodate the new style of torso protection, the globular breastplate.

While mail hauberks over long gambesons were no longer in use by the heavily armored soldiers of the fifteenth century, this combination remained in use by lighter troops through the rest of the medieval period, and even the beginning of the Renaissance. Some soldiers like the Irish gallowglass wore gambesons alone or under a mail hauberk well into the latter half of the sixteenth century.

By the middle of the fifteenth century the arming jack or doublet had been fully developed, a padded garment derivate from the gambeson designed to secure the full plate harness onto the soldier’s body. The armor had small holes through which it could be laced or pointed to the jack, and the leg armor was hanged either directly from the bottom of it or from a separate waistband secured above the hips. Very often strips or sleeves of mail called voiders were attached to this garment to cover the gaps in the plate harness, usually on the armpits and the inside of the elbows. By the end of the sixteenth century it was common to use a padded doublet following the fashions of civilian clothing as protection for the practice of fencing.

Leather was also a very common element of armor. The soft flexible leather most people are familiar with was very often used as an element of armor, and in general in the medieval world it was used to make clothes, lacing, straps and the like. However, when we talk about leather being used as the main protective material, we’re exclusively talking about rawhide. Rawhide is the untanned skin of an animal after it’s been stripped of hair and fat, and then stretched and let try. It’s a hard material that retains some flexibility and can even be slightly transparent if thin enough.

By itself rawhide has some level of resistance to cutting and piercing, and when used in layers it can be very effective at absorbing impact. While they’re not armor, it’s worth mentioning that European wooden shields of all sizes from the migration era onwards have frequently been covered with one or more layers of rawhide for these reasons. At least the rim alone would often be covered with strip of rawhide to prevent it from being cut and split. In other parts of the world shields could be made of several layers of rawhide alone, sometimes with a simple wooden structure to give it shape and rigidity, like the tall shields used by many African tribal warriors. In Sudan and Somalia a particular type of small round shield made from rhino hide could allegedly even stop musket balls.

The use of leather to make body armor goes all the way to antiquity. Its earliest iteration was probably in the shape of scale and lamellar armor. The leather would be layered, shaped and secured in the same manner as metal scales or lames, sometimes in combination with these. This form of defense would be used for many centuries, perhaps most famously by the Mongol warriors of the thirteenth century. The actual structure and function of scale and lamellar armor will be further explained in a future article.

Another use of rawhide was to make boiled leather. This term has been used to refer to many types of fantasy armor, most of them impractical and restrictive garments. Real medieval boiled leather is a very mysterious material, but we do have some historical evidence that was been further studied with the use of experimental archeology. The most plausible theory for the manufacture and use of boiled leather is to cover the rawhide in wax, secure it onto a wooden former and them bake it in an oven until it becomes hard and rigid. Reproductions of this type have a similar feel to modern police riot armor.

The most common form of boiled leather armor was most likely schinbalds, curved plates designed to protect the shins. These appeared in the first half of the thirteenth century, and were usually made of steel or iron, but boiled leather could be used as a more economical alternative. Simple vambraces to protect the forearm are also a very plausible form of defense. The use of boiled leather to protect the torso is much more questionable, since so far there is very few evidence for it, at least in Europe.

In Japan there are also several mentions of boiled leather used to make armor, though I’ve had some trouble finding concrete research material. What I’ve been able to gather comes from the fifteenth century onwards. Some armor worn by relatively poor ashigaru (infantry soldiers) may have been made of boiled leather covered with layers of lacquer. Other pieces of the foot soldier’s armor may have been constructed in the same manner, though most ashigaru were generally less armored than the samurai, who would invariably be clad in iron or steel. The broad conical hat called jingasa could have been made of boiled leather, though iron was the preferred material since it allowed the soldier to use it as a cooking implement.

It’s worth keeping in mind that given the choice between wearing a piece of armor made out of metal or leather, metal is almost always preferable. The only advantage leather gives is reduced manufacturing cost, and perhaps more comfort in certain climates.

In the European Renaissance, near the end of the sixteenth century, a type of armor known as a buff coat appeared. This had the shape of a knee-length coat, sleeveless or otherwise, usually with a broad skirt and a raised collar to protect the neck. It was made with a few layers of rawhide repeatedly treated with cod oil to make them waterproof and to prevent them from rotting. This treatment would give them their characteristic pale yellow color. The edges were sewn together very tightly without an overlap, to prevent the stitching from wearing down. Sometimes a coat could in fact be two coats of different sizes sewn one over the other, to provide better protection in some areas and more flexibility in others. The buff coat could be decorated with ornamental cuts and stitching, or have a fabric lining for comfort, but generally maintained a simple and functional appearance.

The buff coat was of little use against firearms of any kind, but could provide vital protection against swords and pikes, the most common melee weapons of the time. Given its versatility and the complexity of its manufacturing process, even a buff coat of unremarkable quality could cost as much as a breastplate, and the finer models could cost many times more. Buff coats were usually worn underneath a breastplate, though less wealthy soldiers could of course choose to wear it by itself.

Leather and fabric was also used to armor horses. Boiled leather was used to make chamfrons (armor for the horse’s head), sometimes with metallic edges or reinforcements, from the time of the Roman Empire up to the high middle ages. Since the thirteenth century some horses were armored in mail, and some sort of padding or lining was certainly used underneath. We have literary mentions of thick felt used to protect horses, particularly in the Middle East and the north of Africa. There’s also a rising theory amongst cavalry enthusiasts that the heavy mantles used to cover horses, which are widely believed to be purely decorative, may have helped catch arrows that would otherwise strike the troops riding behind the covered horse, but up to this day it’s merely a hypothesis.

We should also keep in mind that, while it may not always be the main protective material, fabric and leather were almost always used in the construction of armor. A metallic lamellar cuirass would need lacing to keep it together. Scale armor needs a backing to have an actual shape. The ventails of the hooded mail hauberk would need lining and lacing to be closed over the face of the wearer (though metallic hooks would also serve). The coat of plates and its later derivatives, the early breastplate and the brigandine, would need a sturdy organic facing to give the plates structure. Even the most elaborate sets of full plate harness relied on a combination of leather straps and lacing to assemble and attach to the wearer.

To finish with leather and fabric, I want to mention a very controversial type of armor. It’s often known as hoplite cuirass, associated with the Greek warriors of antiquity, though variations of it were also used by virtually all the cultures surrounding the Mediterranean. Its earliest appearance is in Homer’s Iliad (estimated between the thirteenth and twelfth centuries BCE) and it remained in use well into the Hellenistic period (starting at the death of Alexander the Great in 326 BCE). The shape is very well known, a hexagonal plate covering the chest from collarbone to navel, connected to a similarly shaped back plate by two rectangular plates at the sides, with pteruges hanging down to the hips. The armor is held in place with the help of a yoke-like piece attached to the back plate which folds forward to cover the shoulders and is then laced to the front. The armor is closed at the left side of the warrior with two lacing points. The whole armor is usually decorated, the edges are painted and the front in particular often had very elaborate designs and metal ornaments.

The controversy lies in the materials and construction of the cuirass. People argue it could have been made with layers of leather, linen or a combination of both. Those who advocate for the linen cuirasses often call this armor linothorax. These is very little evidence to back any of these claims, but I personally believe using leather as the primary material would make more sense, mostly because it would be cheaper. Some cuirasses may have had a thin sheet of metal, either bronze or iron, between the layers of the front plate. These cuirasses were often reinforced with bronze scales. Some were completely covered in them, but they were most commonly used to cover the sides or the waist of the warrior, where experimental archeologists believe they were most likely to be attacked. There’s also some discussion on whether the cuirass was made in a single piece or if it was different pieces connected with hinges and wire pins. Of course, there’s always the possibility that different types of these cuirasses with different construction methods existed at some point in time.

To finish this article, I would like to talk about the armor worn by the native people of the Americas. A common misconception of these people is that of peaceful tribal folk with very primitive and minimal ways of combat. The reality is that when the Conquistadors arrived at the American mainland, they found powerful empires with very well-organized militaries. Some of the most powerful North American tribes had joined together to form the Iroquois Confederacy.

These native soldiers generally worn little in ways of body armor. The most likely reason for this is a preference for comfort in inclement weather. This is an easy conclusion, but I also believe there must have been a preference for light troops suitable for a very mobile type of warfare. There’s also the fact that the metals which made it possible for eastern civilizations to develop rigid armor were very scarce at that time, and were mainly used to make weapons and tools. The troops that could be considered heavy generally relegated the protection of their bodies to their shields, while lighter skirmishers often only carried their main weapons.

The most common form of armor in central and South America came in the shape of a simple quilted vest, very similar to a sleeveless gambeson. This could be of varied length, with the shorter ones stopping above the hips and the longest ones being about mid-thigh length. These could be opened at the front or pulled over the head. Some soldiers may wear richly decorated garments over these armored vests, most famously Mesoamerican warriors who covered themselves in full-body garments designed to look like a beast’s fur or a bird’s feathers. Organic materials were also used to make simple helmets in the form of thick caps.

Wood was normally used to make helmets. Aztec warriors carved hardwood into open-faced helmets shaped and painted like animal heads, to match with the previously mentioned decorated outfits. The Tinglit of the Pacific Northwest Coast, despite their extensive use of firearms, were famous for their use of wooden armor. They made wooden helmets, which came in two pieces, often carved and painted to match. The upper piece would protect the top of the head and the lower piece would surround the face and neck. The wearer could see through the gap between these pieces. They also had wooden body armor in the shape of narrow wooden strips arranged vertically and laced together. This protection was wrapped around the torso and protected it from collarbone to crotch. Most examples of these garments come from the late eighteenth and early nineteenth centuries, but it’s possible that it existed before this time.

Image sources, in order:

Additional Material:

Posted on

How Armor Works: Mail

This is a very special submission that is a really, really in depth discussion of everything about mail (commonly referred to as chainmail).  Due to being so in depth, it’s also quite long so I’ve placed it behind a cut.  It covers:

  • The origins and history of mail
  • How mail actually protects you
  • How it evolved throughout history and improvements in armor
  • Examples of mail as worn by different cultures
  • References and links for further study

If you’re a creator interested in knowing more about mail so you can incorporate it in stories, designs or any other production – I highly recommend this article.

– wincenworks

machiavellianfictionist  submitted:

This series of articles will try to explain in simple terms how several types of historical body armor function and are supposed to look like. I will mostly focus on Europe from late antiquity onward, though I may have a few things to say about Middle-Eastern and East Asian armor. This first part will focus on mail armor.

It goes all the way back to at least the fourth century BCE, and it’s widely believed to have been invented by the Celts. The oldest example found so far comes from the tomb of a Dacian chieftain in Romania. It was extremely rare for a warrior to be clad in mail back in those days, perhaps only reserved for chieftains or champions. Celtic warriors who couldn’t afford armor simply wore regular clothes, though some went into battle topless or even naked to avoid the risk of infection from fabric entering their wounds.

Soon the Romans adopted mail and it became the standard armor for their soldiers. Through them it reached the Sassanid Empire and the entirety of Asia. It remained the most popular and common type of armor all the way to the late middle ages. Even during the Renaissance it was used to complement other types of European armor, and in some middle-eastern countries like India, Turkey or Iran it was still being used by the nineteenth century.

image

Mail armor at its most basic is a flexible sheet of metal formed by a series of interlinked rings. The most common pattern is nowadays known as four-in-one, where each ring is linked to four other, but most Japanese mail had a six-in-one pattern. Three different types of rings can be identified in historical mail: butted, riveted and solid. Butted and riveted rings were made from drawn wire, while solid rings were punched from sheets of metal. Sometimes brass or gilded rings were used at the edges for decorative purposes.

Butted rings are simply short segments of wire bent into a circular shape. It was mainly used in East Asian mail. In most examples the ends have nothing keeping them closed, but Japanese butted mail has the ends twisted together to give the rings strength. Riveted rings have the ends of the wire secured together with a rivet. Solid rings are simply punched from a sheet of metal and require no further shaping, but because they are closed they need riveted rings to keep them together. Mail armor made from a combination of riveted and solid rings first appeared in the Roman army, and remained in use from then on. Rings of different sizes could be used to make a piece of mail armor, larger rings were lighter, but smaller rings provided more protection by leaving less gaps between then, and so they were used to cover more important areas.

Mail behaves in a very peculiar way when worn. The mesh has a grain, which means it has to be worn the right way up for it to work at full potential. It hugs the body to some degree, but not in the same way a skin-tight shirt would. If anything it hangs close to the body like a heavy woolen garment. This also closes the gaps of the rings, making the armor more effective. The mesh would have some degree of transparency, allowing for any material underneath to be seen from up close. A shirt of mail is very comfortable to wear compared to other types of armor. It allows your body to breathe, it’s extremely flexible and it can act as a heat sink. Wearing mail directly over the skin would be very uncomfortable and may cause chafing or painful friction, so it was always worn over some kind of lining, padding or clothes. It rests most of its weight on the wearer’s shoulders, but this can be reduced by wearing a tight belt over it.

Mail armor works by stopping cuts and thrusts by virtue of the strength of its rings and the shock-absorbing effect of the mesh. While thrusts are somewhat more effective than cuts against it, one would need a very narrow and very rigid point to go between the rings. Even then, in order to get deep enough to wound the person underneath, one would have to burst the rings open, and the friction of metal against metal absorbs a lot of energy by itself.

The earliest examples of mail armor are simple sleeveless tunics that covered the torso all the way down to the hips. This design remained consistent through the Roman era as the lorica hamata, worn by cavalry and infantry, though for the legionaries it was temporarily replaced by the lorica segmenta during the first, second and in some regions the third centuries. Legionaries and cavalry sometimes wore two layers of mail on their shoulders, as a U-shaped cape that was held at the front with a brooch. The tunic eventually became slightly longer and developed short sleeves to fully cover the shoulders. It is possible that the Romans wore some sort of padded garment underneath their mail, but I haven’t been able to find any reliable evidence for that so far.

image

After the fall of Rome armor was once again rare amongst European warriors, but not as rare as it had been at its conception. Infantry formations would be defined by where the mail-clad soldiers were position, usually on the front ranks or at the flanks. Elbow-length sleeves were already common by the tenth century, and by the eleventh century the neck of the tunic was very often extended upwards to form an integral hood or coif. Sometimes a strip or square of mail hanged loose from the front of the hood, and could be raised and tied with tongs to cover the chin or mouth. This was called a ventail. The tunic was now long enough to cover the knees, and it was often split on the front up to just below the crotch, to make it easier to wear while riding a horse. This hooded tunic was then called a hauberk. It’s worth mentioning that hair tangles very easily with mail. Norman warriors cut their hair very short and shaved the back of their heads. It’s also possible they wore leather or fabric hoods under their mail coifs.

image

By the twelfth century, after the First Crusade, the sleeves of mail covered the entirety of the arm and often ended in a leather mitten, with the back of the hand covered in mail and a slit on the palm in case the knight needed the use of his fingers. The hauberk was commonly worn over a padded garment called a gambeson, which will be described in detail further on. A similarly padded cap was worn under the mail coif. These two added an extra degree of shock absorption to the mail, and provided a cut-resistant barrier if the rings of the mail were compromised. The legs and feet were also covered by a hose of mail tied at the back with tongs.

These were called chausses. Infantry soldiers wore similar armor, though sometimes without the coif or the mittens.

image

By the latter half of the thirteenth century the mail coif became separated from the hauberk, and the sleeves sometimes ended in three-finger mittens. These mittens would soon be dropped in favor of the gauntlet. The coat of plates had just been developed, but mail was invariably worn underneath it. Mail was also used to protect horses, always over some sort of padding or lining, but it was only done by the heaviest cavalry. It was also used to reinforce reins. By the end of the fourteenth century, when the solid breastplate had already come into the scene, European mail body-armor could be separated into three forms. The hauberk was the knee-length tunic with long sleeves. The haubergeon had elbow-length sleeves and covered roughly half of the thighs. A shirt of mail with very short sleeves that goes down to the hips is sometimes called a byrnie, but the term can also be applied to any tunic of mail. Broad strips of mail over padding could also be used to protect the neck by hanging from the edge of a helmet. This was called an aventail. Sometimes these had flaps that could be used to cover the face in battle and dropped when needed.

image

At this point it’s worth mentioning a type of armor often known was plated mail. This is simply mail armor in which metal plates replace the steel rings in certain areas, particularly around the torso. It was also used to protect the horses of heavy cavalry soldiers. This type of armor was very common in Asia and Eastern Europe, most likely popularized by the Mongols of the Golden Horde, and remained in use for centuries to come. The Japanese would develop this type of armor into the karuta tatami do, a cuirass of plated mail with a fabric backing. In the Middle East this would evolve into what’s called mirror armor, a cuirass of large plates connected with mail.

image

Going back to Europe, the hauberk remained in use together with the new plate armor, but this changed by the middle of the fifteenth century. While the tunics remained popular amongst more lightly armored soldiers, fully armored soldiers only used mail in the shape of sleeves, hose, collars or skirts to cover the gaps in the full plate harness. Horse armor was also made of steel plates, with mail used to cover the gaps.

image

During the sixteenth century the collar, hose and finally the skirt were phased out as plate armor became more complex. Mail was also used in what can be considered auxiliary armor, like a circle of mail that covered the neck and shoulders known as bishop’s mantle. Some light cavalry still used hauberks, like the Italian stradioti and the Polish-Lithuanian pancerni, as well as all kinds of irregular troops. This practice continued through the seventeenth century. The gallowglass, elite Irish infantry soldiers, also favored the long hauberk and the bishop’s mantle, even nearing the end of the sixteenth century.

image

The use of mail by Europeans dwindled almost into nonexistence with the eighteenth century. The only significant use it saw was in the shape of a sheet of mail made of very small rings, meant to be concealed under one’s clothes as a defense against dueling weapons, but even then it was rare at best. By contrast, mail armor remained a popular form of defense in Asia even well into the nineteenth century. India in particular is a good example of this. The numerous conflicts involving the various Indian factions and the British Empire saw a large amount of close-quarters combat, since Indian armies still favored melee weapons. Mail tunics were common, but so were amazingly elaborate examples of plated mail and mirror armor.

image

Image sources, in order:

Additional Material:

Posted on

How Armor Works: Mail

This is a very special submission that is a really, really in depth discussion of everything about mail (commonly referred to as chainmail).  Due to being so in depth, it’s also quite long so I’ve placed it behind a cut.  It covers:

  • The origins and history of mail
  • How mail actually protects you
  • How it evolved throughout history and improvements in armor
  • Examples of mail as worn by different cultures
  • References and links for further study

If you’re a creator interested in knowing more about mail so you can incorporate it in stories, designs or any other production – I highly recommend this article.

– wincenworks

machiavellianfictionist  submitted:

This series of articles will try to explain in simple terms how several types of historical body armor function and are supposed to look like. I will mostly focus on Europe from late antiquity onward, though I may have a few things to say about Middle-Eastern and East Asian armor. This first part will focus on mail armor.

It goes all the way back to at least the fourth century BCE, and it’s widely believed to have been invented by the Celts. The oldest example found so far comes from the tomb of a Dacian chieftain in Romania. It was extremely rare for a warrior to be clad in mail back in those days, perhaps only reserved for chieftains or champions. Celtic warriors who couldn’t afford armor simply wore regular clothes, though some went into battle topless or even naked to avoid the risk of infection from fabric entering their wounds.

Soon the Romans adopted mail and it became the standard armor for their soldiers. Through them it reached the Sassanid Empire and the entirety of Asia. It remained the most popular and common type of armor all the way to the late middle ages. Even during the Renaissance it was used to complement other types of European armor, and in some middle-eastern countries like India, Turkey or Iran it was still being used by the nineteenth century.

image

Mail armor at its most basic is a flexible sheet of metal formed by a series of interlinked rings. The most common pattern is nowadays known as four-in-one, where each ring is linked to four other, but most Japanese mail had a six-in-one pattern. Three different types of rings can be identified in historical mail: butted, riveted and solid. Butted and riveted rings were made from drawn wire, while solid rings were punched from sheets of metal. Sometimes brass or gilded rings were used at the edges for decorative purposes.

Butted rings are simply short segments of wire bent into a circular shape. It was mainly used in East Asian mail. In most examples the ends have nothing keeping them closed, but Japanese butted mail has the ends twisted together to give the rings strength. Riveted rings have the ends of the wire secured together with a rivet. Solid rings are simply punched from a sheet of metal and require no further shaping, but because they are closed they need riveted rings to keep them together. Mail armor made from a combination of riveted and solid rings first appeared in the Roman army, and remained in use from then on. Rings of different sizes could be used to make a piece of mail armor, larger rings were lighter, but smaller rings provided more protection by leaving less gaps between then, and so they were used to cover more important areas.

Mail behaves in a very peculiar way when worn. The mesh has a grain, which means it has to be worn the right way up for it to work at full potential. It hugs the body to some degree, but not in the same way a skin-tight shirt would. If anything it hangs close to the body like a heavy woolen garment. This also closes the gaps of the rings, making the armor more effective. The mesh would have some degree of transparency, allowing for any material underneath to be seen from up close. A shirt of mail is very comfortable to wear compared to other types of armor. It allows your body to breathe, it’s extremely flexible and it can act as a heat sink. Wearing mail directly over the skin would be very uncomfortable and may cause chafing or painful friction, so it was always worn over some kind of lining, padding or clothes. It rests most of its weight on the wearer’s shoulders, but this can be reduced by wearing a tight belt over it.

Mail armor works by stopping cuts and thrusts by virtue of the strength of its rings and the shock-absorbing effect of the mesh. While thrusts are somewhat more effective than cuts against it, one would need a very narrow and very rigid point to go between the rings. Even then, in order to get deep enough to wound the person underneath, one would have to burst the rings open, and the friction of metal against metal absorbs a lot of energy by itself.

The earliest examples of mail armor are simple sleeveless tunics that covered the torso all the way down to the hips. This design remained consistent through the Roman era as the lorica hamata, worn by cavalry and infantry, though for the legionaries it was temporarily replaced by the lorica segmenta during the first, second and in some regions the third centuries. Legionaries and cavalry sometimes wore two layers of mail on their shoulders, as a U-shaped cape that was held at the front with a brooch. The tunic eventually became slightly longer and developed short sleeves to fully cover the shoulders. It is possible that the Romans wore some sort of padded garment underneath their mail, but I haven’t been able to find any reliable evidence for that so far.

image

After the fall of Rome armor was once again rare amongst European warriors, but not as rare as it had been at its conception. Infantry formations would be defined by where the mail-clad soldiers were position, usually on the front ranks or at the flanks. Elbow-length sleeves were already common by the tenth century, and by the eleventh century the neck of the tunic was very often extended upwards to form an integral hood or coif. Sometimes a strip or square of mail hanged loose from the front of the hood, and could be raised and tied with tongs to cover the chin or mouth. This was called a ventail. The tunic was now long enough to cover the knees, and it was often split on the front up to just below the crotch, to make it easier to wear while riding a horse. This hooded tunic was then called a hauberk. It’s worth mentioning that hair tangles very easily with mail. Norman warriors cut their hair very short and shaved the back of their heads. It’s also possible they wore leather or fabric hoods under their mail coifs.

image

By the twelfth century, after the First Crusade, the sleeves of mail covered the entirety of the arm and often ended in a leather mitten, with the back of the hand covered in mail and a slit on the palm in case the knight needed the use of his fingers. The hauberk was commonly worn over a padded garment called a gambeson, which will be described in detail further on. A similarly padded cap was worn under the mail coif. These two added an extra degree of shock absorption to the mail, and provided a cut-resistant barrier if the rings of the mail were compromised. The legs and feet were also covered by a hose of mail tied at the back with tongs.

These were called chausses. Infantry soldiers wore similar armor, though sometimes without the coif or the mittens.

image

By the latter half of the thirteenth century the mail coif became separated from the hauberk, and the sleeves sometimes ended in three-finger mittens. These mittens would soon be dropped in favor of the gauntlet. The coat of plates had just been developed, but mail was invariably worn underneath it. Mail was also used to protect horses, always over some sort of padding or lining, but it was only done by the heaviest cavalry. It was also used to reinforce reins. By the end of the fourteenth century, when the solid breastplate had already come into the scene, European mail body-armor could be separated into three forms. The hauberk was the knee-length tunic with long sleeves. The haubergeon had elbow-length sleeves and covered roughly half of the thighs. A shirt of mail with very short sleeves that goes down to the hips is sometimes called a byrnie, but the term can also be applied to any tunic of mail. Broad strips of mail over padding could also be used to protect the neck by hanging from the edge of a helmet. This was called an aventail. Sometimes these had flaps that could be used to cover the face in battle and dropped when needed.

image

At this point it’s worth mentioning a type of armor often known was plated mail. This is simply mail armor in which metal plates replace the steel rings in certain areas, particularly around the torso. It was also used to protect the horses of heavy cavalry soldiers. This type of armor was very common in Asia and Eastern Europe, most likely popularized by the Mongols of the Golden Horde, and remained in use for centuries to come. The Japanese would develop this type of armor into the karuta tatami do, a cuirass of plated mail with a fabric backing. In the Middle East this would evolve into what’s called mirror armor, a cuirass of large plates connected with mail.

image

Going back to Europe, the hauberk remained in use together with the new plate armor, but this changed by the middle of the fifteenth century. While the tunics remained popular amongst more lightly armored soldiers, fully armored soldiers only used mail in the shape of sleeves, hose, collars or skirts to cover the gaps in the full plate harness. Horse armor was also made of steel plates, with mail used to cover the gaps.

image

During the sixteenth century the collar, hose and finally the skirt were phased out as plate armor became more complex. Mail was also used in what can be considered auxiliary armor, like a circle of mail that covered the neck and shoulders known as bishop’s mantle. Some light cavalry still used hauberks, like the Italian stradioti and the Polish-Lithuanian pancerni, as well as all kinds of irregular troops. This practice continued through the seventeenth century. The gallowglass, elite Irish infantry soldiers, also favored the long hauberk and the bishop’s mantle, even nearing the end of the sixteenth century.

image

The use of mail by Europeans dwindled almost into nonexistence with the eighteenth century. The only significant use it saw was in the shape of a sheet of mail made of very small rings, meant to be concealed under one’s clothes as a defense against dueling weapons, but even then it was rare at best. By contrast, mail armor remained a popular form of defense in Asia even well into the nineteenth century. India in particular is a good example of this. The numerous conflicts involving the various Indian factions and the British Empire saw a large amount of close-quarters combat, since Indian armies still favored melee weapons. Mail tunics were common, but so were amazingly elaborate examples of plated mail and mirror armor.

image

Image sources, in order:

Additional Material:

Posted on

I found a scenario where boobplates and other kinds of outrageously impractical female armor were not only justified but historically accurate: gladiatorial combat. While they were certainly rare, female gladiators existed and they often wore revealing and impracical outfits in battle. This was because gladiatorial armor wasn’t supposed to be protective, it was supposed to look fancy and leave the wearer vulnerable. People went to the arena to see blood.

While the arenas of Rome would certainly have been the place where you would have seen impractical armor and boobplates if they were to ever exist… however there is no evidence to suggest that ridiculous female armor was ever worn by an gladiatrix.*

There is certainly evidence that female gladiators fought in the arena, however nobody has yet to find the remains of any ridiculous armor, any writings of ridiculous armor or any artistic evidence of it. 

Gladiator armor was made “impractical” in the sense that it didn’t protect their vital areas – but it didn’t impede their ability to fight or recover from a fight like a boobplate would.  They after all, there to provide a great show (their lives literally depended on it) and boobplates and similar armor would have just reduced the chances for blood (and boobs!)

“Contestants” (to use that term as loosely as possible) in the Roman arenas came in two varieties: People who were being punished in a theatrical manner and people who were basically professional athletes (even if they may be slaves).

According to Seneca the Younger, those who were there to be punished weren’t even issued helmets or shields so had no ridiculous armor.  The professional athletes had very specific equipment issued to them depending on their roles, No room for flashy boob armor.

– wincenworks

* Do not do an image search for “gladiatrix”, you will not find anything remotely helpful, but you will find a lot of stuff that is down right disturbing.